C L E A N , I N S P E C T, AND REPLACE

REPLACE ROAD WHEEL HUB - TM-9-2350-261-20-2_482

TM-9-2350-261-20-2 Carrier Personnel Full Tracked Armored M113A2 2350-01-068-4077 Carrier Command Post Light Tracked M577A2 2350-01-068-4089 Manual
Page Navigation
448

TM9-2350-261-20-2 A N D R E P L A C E 12. Pack inner bearing (7) with grease. Install bearing in rear of hub (3). Check fittings and relief valve for wear and damage. Replace if needed. 13. Apply a light coat of sealing compound to external surface of new seal (8). Inspect bearings LAW TM 9-214. Replace if needed. 14. Install new seal (8) in hub (3) using spacer. C A U T I O N Bearings must be replaced as assemblies. Do not mix cups and bearings. I N S T A L L 9. 10. 11. If removed, install new bearing cups (1 and 2) in hub (3). Use replacer. If removed, install new bolts (4) in road wheel hub (3). Apply a light coat of sealing compound to threads of relief valve (5) and lubrication fitting (6). Install valve and fitting in hub (3). 22-10 C L E A N , I N S P E C T, 7 .

Privacy Statement
Press Release
Contact