TM 9-2350-261-20-2
101. Install circuit 38 lead (1) on three cradles
(2). Secure with three cradle clips (3).
102. Install clamp (4) on rear dome light (5).
Secure with screw (6) and nut (7).
103. Connect circuit 38 lead (1) to dome
light (5).
FOLLOW-THROUGH STEPS
1. Install rear floor plate (page 24+7).
2. Connect battery ground lead (page 13-2).
3. Turn MASTER SWITCH ON (see your -10).
Check that electrical system works properly.
4. Raise and lock ramp (see your -10).
5. Stop/shutdown engine (see your -10).
END OF TASK
12-130
