TM 9-2350-261-20-2
62.
63.
64.
65,
66.
67.
68.
Install new grommet (1) and circuit 450B
lead (2) in distribution box (3).
Connect circuit 450B lead (2) to circuit
breaker (4).
Install new grommet (5) and circuit 450
lead (6) in distribution box (3).
Connect circuit 450 lead (6) to circuit
breaker (7),
Install new grommet (8) and circuit 400
lead (9) in distribution box (3).
Connect circuit 37 lead (10) to circuit 38
lead (11).
Install circuits 400, 2, and 6 leads
69. Install distribution box (3) on master switch
panel. Secure with eight screws (18),
washers ( 19), and new locknuts (20).
NOTE
Inspect gasket (21). Replace if damaged.
70.
71.
Install rear main wiring harness (22) on
guard (23). Secure with three screws (24),
nuts (25), and clamps (26).
Install guard (23) on two weldnuts (27).
Secure with two screws (28) and new
lockwashers (29).
(9, 12, and 13) on bus bar (14). Secure
and
with screw ( 15), new lockwasher ( 16),
nut (17).
12-126