TM 9-2350-261-20-2
ADJUST
8.
9.
10.
11.
12.
13.
14.
Connect battery ground lead (page 13-2).
Turn MASTER SWITCH ON (see your -10).
Loosen two screws (1) on switch (2).
Pull both steering levers back to first notch
and lock levers (see your -10).
Place switch (2) against steering levers so
that stop light switch comes on.
Release steering levers (see your -10). Stop
lights should go out.
Tighten two screws (1) on switch (2).
NOTE
If movement of switch is not enough to
adjust switch, bend tab on steering levers
to get correct adjustment.
FOLLOW-THROUGH STEPS
1. Turn all switches OFF (see your -10).
2. Close power plant front access door, and raise
trim vane (see your -10).
END OF TASK
12-133
