TM 9-2350-261-20-1
8. Disconnect vent tube (1) from two
I N S T A L L
elbows (2 and 3).
.
12. Apply a thin, even coat of sealing compound
9. Remove five screws (4), lockwashers (5),
to cleaned external threads of fittings.
clamps (6), and vent tube (1) from five
weldnuts (7). Discard lockwashers.
13. Install bushing (10) in right fuel tank (11).
10. Remove two elbows (8) and elbow (2) from
14. Install elbow (3) on bushing (10).
filler neck (9).
15. Install two elbows (8) and elbow (2) in filler
11. Remove elbow (3) and bushing (10) from
neck (9).
right fuel tank (11).
GO TO NEXT PAGE
6-71
