TM 9-2350-261-20-1
26.
27.
28.
29.
30.
Secure front of two fuel tanks (1 and 2) to
sponson with six screws (3), new key
washers (4), two plates (5), and bracket (6).
Connect vent hose (7) to elbow (8).
Connect vent hose (9) to elbow (10).
Install two supply hoses (11) on fuel tanks
(1 and 2). Secure with two clamps (12).
Connect four supply hoses (13)
adapters (14) on fuel tanks (1
with four
FOLLOW-THROUGH STEPS
1.
2.
3.
4.
5.
6.
Install fuel tank filler flange (page 6-59).
7.
Install fuel tank access covers (page 6-57)
8.
Install fuel quantity transmitter (page (6-54.
9.
Install rear bilge pump discharge tube
10.
(page 16-11).
start
Raise
engine (see your
-10). Check for leaks.
and lock ramp (see your -10).
Stop/shutdown engine (see your -10).
Install work tables
(page 24-173, 24-175 or 24-178).
Fill fuel tanks (see your -10).
11. Install map board (see your -10).
Connect battery ground lead (page 13-2).
END OF TASK
6-75
) and 2).