TM 9-2350-261-20-1
16.
17.
18.
19.
20.
21.
Install two elbows
tank (3).
(1 and 2) in left fuel
Install nipple (4) in elbow (2).
Install elbow (5) on nipple (4).
Connect vent tube (6) to two
elbows (7 and 8).
Install vent tube (6) on five weldnuts (9).
Secure with five clamps (10), new
kxkwashers (11), and screws (12).
Connect vent hose (13) to elbow (1) at left
fuel tank (3).
22.
23.
24.
25.
26.
Connect vent hose (14) to elbow (5) at left
fuel tank (3).
Connect two vent hoses (13 and 14) to two
elbows (15) at filler neck (16).
Install two vent hoses (13 and 14) on seven
weldnuts (17). Secure with seven clamps
(18), new lockwashers (19), and screws (20).
Secure vent hose (14) to five weldnuts (21)
with five clamps (22), new lockwashers (23),
and screws (24).
Fill fuel tanks. Check for leaks
(see your -10).
FOLLOW-THROUGH STEPS
1. Install map board (see your -10).
4. Raise and lock ramp (see your -10).
2. Install work tables (page 24-178).
5. Stop engine (see your -10).
3. Connect battery ground lead (page 13-2).
END OF TASK
6-72
