6.
7.
8.
9
Disconnect return hose (1) from nipples (2,3)
or tee (3.1) (M1068).
10.
Remove screw (4), locknut (5), washer (6),
and clamp (7) that secure return hose (1) to
bracket (8). Discard locknut.
11.
Disconnect quick disconnect half (18) from
quick disconnect half (19).
Remove quick disconnect half (19) from
adapter (20).
12 .
Remove four screws (9), lockwashers (10),
clamps (11), and return hose (1) from four
weldnuts (12). Discard lockwashers.
13
Remove adapter (20) from return tube (21).
Disconnect return tube (21) from nipple (2).
.
14.
Remove two clips (13), circuit 601 lead (14),
circuit 6 cable (15), and circuit 48B cable
(16) from two cradles (17). Remove two
cradles (17).
15.
TM 9-2350-261-20-1
Remove screw (22), clamp (23), and return
tube (21) from weldnut (24).
Remove jamnut and nipple (2) from power
plant rear bulkhead.
GO TO NEXT PAGE
Change 4
6-67
