TM 9-2350-261-20-16.7.8.9.10.11.12.13.14.Remove four locknuts (1), screws (2),12 washers (3), and 4 mounts (4) thatsecure bottom of fuel tanks (5 and 6) tosponson.Disconnect vent tube (7) from elbow (8).Remove four screws (9), plates (10), eightwashers (11), and four mounts (12) thatsecure bottom of fuel tanks (5 and 6) tosponson.Remove two fueliel tanks (5 and 6)trom carrier.Remove elbow (13) from left fuel tank (5).Remove eIbow (14) from nipple (10.Remove nipple (16) and elbow (16) from leftfuel tank (5).Remove elbow (8) and bushing (17) fromright fuel tank (6).Remove plug (18) from right fuel tank (6).INSTALL15.16.17.18.19.20.21.22.’23.24.25.Apply a thin, even coat of sealing compound to cleaned external threads of fittings.InstallInstallInstallInstallInstallInstallInstallplug (18) in right fuel tank(6).bushing (17) in fuel tank (6).elbow (8) in bushing (17).elbow (13) in left fuel tank (5).eIbow (16) in left fuel tank (5).nipple (15) in elbow (16).elbow (14) on nipple (15).Place fuel tanks (5 and 6) on left and rightsponsons.Secure top of two fuel tanks (5 and 6) tohull with four screws (9), plates (10), eightwashers (11), and four mounts (12).Secure bottom of two fuel tanks (5 and 6)to sponson with four new locknuts (1),screws (2), 12 washers (3), and fourmounts (4).-6-74
Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business