TM 9-2350-287-20-1
7-18.
NBC POWER CONTROL BOX REPAIR (continued).
11.
12.
13.
14.
15.
Remove two screws (54), Iockwashers (53), and
two leads 415-4 (13) and 415-7 (21 ) from switch
(52).
Remove nut (55), washer (56), and indicator light
(47) from cover (8).
NOTE
Perform step 13 only
light or leads 415-5 or 415-6 are
if indicator
defective.
Unsolder and remove leads 415-5 (57) and 415-6
(58) from indicator light (47).
Remove dust boot (48), nut (49), washer (50),
switch (52), and guard (51) from cover (8).
Remove two screws (59) washers (60), Iockwashers (61), nuts (62) and circuit breaker (15) from mounting
plate (16). Discard Iockwashers.
7-54
