TM 9-2350-287-20-1
7-18.
NBC POWER CONTROL BOX REPAIR (continued).
b.
DISASSEMBLY
1.
Remove 10 screws (6) and Iockwashers (7) from cover (8) and control box (2). Discard Iockwashers.
CAUTION
Use care when removing cover from control box. Damage to wires may result.
NOTE
To ensure proper assembly, make sure all wire leads are tagged before removal.
2.
Lift cover (8) off control box (2) and remove two nuts (35 and 38) and Iockwashers (36 and 39) from relay (33).
3.
Remove two wires (23 and 34), ground wire 415-8 (37), and wire 415-5 (40) from relay (33).
4.
Remove nut (9), Iockwasher (10), and five wire leads, 415-C (42),415-D (43),415-E (44),415-F (45), and 415-
G (46) from relay terminal (41). Discard Iockwasher.
5.
Remove nut (24), Iockwasher (25), and two wires 415-3 (27 and 28) from relay terminal (26), Discard
Iockwasher.
6.
Remove four screws (21) and Iockwashers (22) from mounting plate (16) and control box (2).
7.
Lift mounting plate (16) out of control box (2) to access underside of mounting plate (16).
7-52
