TM 9-2350-287-20-1
6-11. INLET THERMOSTAT AND HOUSING ASSEMBLY REPLACEMENT (continued).
WARNING
Adhesives can burn easily, can give off harmful vapors, and are harmful to skin and
clothing. To avoid injury or death, keep away from open flame and use in a well-
ventilated area. If adhesive gets on skin or clothing, wash immediately with soap and
water.
2.
Apply adhesive to hose (19), install hose (19) on manifold coolant connector (12) and crossover tube (20), and
tighten two clamps (18).
3.
Install three screws (17), nut (15), and four new Iockwashers (16) on header (14).
6-27
