TM 9-2350-287-20-1
6-11. INLET THERMOSTAT AND HOUSING ASSEMBLY REPLACEMENT (continued).
4.
Using seal installer and installer handle, install two new seals (8) in inlet housing (7) with wider lip on top,
5.
Install two inlet thermostats (9) in inlet housing (7).
6.
Install new gasket (10) and inlet housing (7) on manifold coolant connector (12),
7,
Install six screws (2), new Iockwashers (3), and washers (4) on manifold coolant connector (12).
8.
Install bracket (11) and two screws (2) and new lockwashers (3) on manifold coolant connector (12),
9.
Apply adhesive to hose (6), install hose (6) on radiator (1) and inlet housing (7), and tighten two clamps (5).
FOLLOW-ON MAINTENANCE:
Remove radiator fan protectors (para 2-8).
Close and secure air intake grille (refer to TM 9-2350-287-10).
6-28
