TM 9-2350-287-20-1
6-12. BYPASS THERMOSTAT AND HOUSING ASSEMBLY REPLACEMENT.
This Task Covers:
a. Removal
b. Installation
Initial Setup:
Tools/Test Equipment:
General mechanics tool kit
(Item 24, Appendix 1)
Materials/Parts:
Adhesive (Item 1, Appendix D)
Gasket (Item 62, Appendix H)
Gasket (Item 63, Appendix H)
LockWasher (7) (Item 163, Appendix H)
Seal (Item 294, Appendix H)
Thermostat (Item 372, Appendix H)
Equipment Conditions:
Vehicle parked on level ground (refer to
TM 9-2350-287-10).
Radiator fan protectors installed (para 2-8).
Front hull slope plate removed (para 15-11).
Coolant system drained (refer to TM 9-2350-287-10).
a.
REMOVAL
WARNING
A protective fan screen must be installed before doing maintenance in the engine
compartment when engine is running or when running engine in the ground-hop
mode. Contact with rotating fan can cause injury.
1.
Loosen two clamps (1) and disconnect manifold connector (3) from crossover tube connector (2).
6-29