TM 9-2350-287-20-1
4-28. ACCELERATOR, THROTTLE, AND ENGINE CONTROL GOVERNOR REPLACEMENT
AND ADJUSTMENT (continued).
11.
Install connecting link (8) on engine throttle lever (10) with two washers (9) and new cotter pin (11 ).
12.
Install throttle control lever (7) at transmission with screw (4) and washer (5).
Use care when installing spring. Spring is under tension and can act as a projectile
when released and could cause severe eye injury.
13.
Install assembled rod (1) on throttle control lever (7) with spring (6), three washers (3), and two new cotter pins
(2).
4-95