TM 8-2350-287-20-1
4-28. ACCELERATOR, THROTTLE, AND ENGINE CONTROL GOVERNOR REPLACEMENT
AND ADJUSTMENT (continued).
e.
INSTALLATION
1.
2.
3.
NOTE
All washers and cotter pins used in the installation of assembled rods may be
installed after final adjustment is complete.
Position accelerator pedal assembly (38), accelerator bracket (37), and lever (26) through bulkhead (24) and
on mounting bracket (40) as an assembly.
Install accelerator bracket (37) on mounting bracket (40) with two screws (34), new lockwashers (35), and
washers (36).
Install spring (39) on accelerator pedal assembly (38) and bulkhead (24).
4-92