TM 9-2350-287-20-1
4-28. ACCELERATOR, THROTTLE, AND ENGINE CONTROL GOVERNOR REPLACEMENT
AND ADJUSTMENT (continued).
6.
Remove accelerator bracket (53) from accelerator pedal assembly (38).
7.
Remove three screws (52) and Iockwashers (56), cap (55), and bearing (54) from accelerator bracket (53).
8.
9.
10.
11.
Discard Iockwashers.
Remove two screws (60) and Iockwashers (59), cap (58), and bearing (61) from accelerator support (57).
Discard Iockwashers.
Remove spring pin (65) and two spring pins (66), collar (63), accelerator padel (62), and lever (26) from shaft
(64). Discard spring pins.
Separate cover (67), two disks (68), and throttle lever (69).
Loosen nut (71 ), and remove adjusting screw (72) and nut (71) from support (70).
4-89