TM 9-2350-287-20-1
4-27.
GLOW PLUG AND GLOW PLUG CONTROLLER REPLACEMENT (continued).
4.
Disconnect wiring harness connector (11) from glow plug controller (8).
5.
Disconnect two electrical connectors (9 and 10) from glow plug controller (8).
6.
Remove two screws (12) and lockwashers (13) and glow plug controller (8) from engine. Discard lockwashers.
7.
Squeeze and unfasten clamp (15) securing wiring harness (14) to engine.
8.
Disconnect three hydraulic lines (16) at quick disconnects (17).
Change 1 4-80
