3-8. OIL FILTER AND OIL FILTER ADAPTER REPAIR.

b. INSTALLATION - TM-9-2350-287-20-1_539

d. INSTALLATION - TM-9-2350-287-20-1_541

TM-9-2350-287-20-1 Carrier Ammunition Tracked M992A21 (2350-01-352-3021) EIC:AE6 Manual
Page Navigation
516

TM 9-2350-287-20-1 3-8. OIL FILTER AND OIL FILTER ADAPTER REPAIR. This Task Covers: a. Removal b. Disassembly c. Assembly d. Installation Initial Setup: Tools/Test Equipment: • General mechanic's tool kit (Item 24, Appendix I) • Toque wrench, 0-175 ft-lb (Item 69, Appendix I) • Drain pan (Item 14, Appendix I) Materials/Parts: • Gasket (2) (Item 86, Appendix H) • Gasket (2) (Item 91, Appendix H) • Lockwasher (4) (Item 177, Appendix H) • Preformed packing (2) (Item 238, Appendix H) Equipment Conditions: • Vehicle parked on level ground (refer to TM 9-2350-287-10). • Left and right transmission access doors opened (refer to TM 9-2350-287-10). a. 1. 2. 3. 4. 5. b. 1. 2. REMOVAL Place drain pan under two oil filter drain plugs (5). Remove two drain plugs (5) and allow oil to drain. Disconnect two hoses (1 and 10) from two elbows (2). Disconnect hose (11) from elbow (12). Remove four screws (3), nuts (9), Iockwashers (8), and washers (7) and two oil filter covers (4) from bracket (6). Discard Iockwashers. DISASSEMBLY Loosen two center studs (21). Remove two oil filter covers (4) and gaskets (14) from adapter (13). Discard gaskets. 3-43

Privacy Statement
Press Release
Contact