TM 9-2350-287-20-1
3-6 OIL COOLER HOSES REPLACEMENT (continued).
b.
1.
2.
3.
4.
5.
6.
7.
INSTALLATION
lnstalI two split flange halves(3), newpreformed
packing (4), and hose (14) on rear of engine oil
cooler (5).
Install four screws (1 ) and new lockwashers (2)
on two split flange halves (3).
Install two split flange halves (7), new preformed
packing (6), and hose (8) on front of engine oil
cooler (5).
Install four screws (9) and new Iockwashers
(10) on two split flange halves (7).
Install two hoses (8 and 14) on elbows (13) on
two oil filter covers (12).
Install two drain plugs (11) on two oil fitler
covers (12).
Add engine oil (refer to Appendix G).
Install transmission oil cooler hose assembly (para 8-5).
Install engine coolant tube assembly (para 6-10).
Install bypass thermostat and housing assembly (para 6-12).
Install engine coolant manifold connector housing (para 6-11).
Install powerpack (para 3-2).
FOLLOW-ON TASKS:
3-40