TM 9-2350-287-20-13-8. OIL FILTER AND OIL FILTER ADAPTER REPAIR (continued).3.4.5.c.1.2.3.4.d.1.2.3.4.5.Remove two center studs (21), gaskets (22), filter elements (15), retaining rings (16), retainers (17), preformedpackings (18), washers (19), and springs (20) from two oil fitter covers (4). Discard gaskets and preformedpackings.Remove elbow (12) from adapter (13).Remove two elbows (2) and bushings (23) from adapter (13).ASSEMBLYInstall two bushings (23) and elbows (2) on adapter (13).Install elbow (12) on adapter (13).Install two springs (20), washers (19), new preformed packings (18), retainers (17), retaining rings (16), filterelements (15), new gaskets (22), and center studs (21) in two oil fitter covers (4).Install two oil filter covers (4) and new gaskets (14) on adapter (13). Torque two center studs (21) between40 and 50 ft-lb (54 and 68 N•m).INSTALLATIONInstall two oil filter covers (4) on bracket (6) with four screws (3), washers (7), new Iockwasher (8), and nuts(9).Connect hose (11) to elbow (12).Connect two hoses (1 and 10) to two elbows (2).Install two drain plugs (5) in two oil filter covers (4).Add engine oil (refer to Appendix G).FOLLOW-ON MAINTENANCE:• Close transmission access doors (refer to TM 9-2350-287-10).3-44
Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business
