TM 9-2350-287-20-1
3-11. CROSSOVER EXHAUST PIPE REPLACEMENT
This Task Covers:
a. Removal
b. Installation
Initial Setup:
Tools/Test Equipment:
Air intake grille opened and secured
General mechanic's tool kit (Item 24,
(refer to TM 9-2350-287-10).
Appendix I)
Equipment Conditions:
Vehicle parked on level ground
refer to TM 9-2350-287-10).
a.
REMOVAL
1.
Remove quick-release pin (7) and
accelerator linkage (1) from lever (6).
Move accelerator linkage (1) clear of
crossover exhaust pipe (5).
2.
Remove quick-release pin (9) and fuel
shutoff cable (2) from lever (8). Move
fuel shutoff cable (2) clear of exhaust
pipe (5).
3
Remove two clamps (4) and exhaust
pipe (5) from two exhaust manifolds
(3).
b.
INSTALLATION
1.
Install exhaust pipe (5) and two clamps
(4) on two exhaust manifolds (3).
2.
Install fuel shutoff cable (2) on lever (8)
with quick-release pin (9).
3.
Connect accelerator linkage (1) to lever
(6) with quick-release pin (7).
FOLLOW-ON MAINTENANCE:
Close air intake grille (refer to TM 9-2350-287-10).
3-47
