TM 9-2350-287-20-1
3-9.
LIQUID (LUBE OIL) LEVEL GAGE ROD AND TUBE ASSEMBLY REPLACEMENT (continued).
CAUTION
To prevent contaminants from entering engine oil, cap all ports immediately after
removing components.
3.
Unscrew nut (10) and remove metal tube
assembly (2) from straight adapter (9).
4.
Remove straight adapter (9) from engine.
b.
INSTALLATION
1.
Install straight adapter (9) in engine.
2.
Install metal tube assembly (2) in straight
adapter (9) and tighten nut (10).
3.
Secure metal tube assembly (2) to sensor cover
(6) with loop clamp (5), new lockwasher (7),
washer (4), screw (3), and nut (8).
4.
Install liquid level gage rod (1) in metal tube
assembly (2).
FOLLOW-ON MAINTENANCE:
[Follow-on Task Deleted]
Install powerpack (para 3-2).
Change 1 3-45.0
