TM 9-2350-277-20-5
REPLACE REAR BILGE PUMP AND STRAINER — Continued
0635 00
4.
Remove two screws (9), three lockwashers (10), tablock washer (11), ground lead (12), and bracket (13) from hull
weldnuts. Discard washers.
5.
Loosen clamp (14). Remove pump (2) from hose (15) and cushion (16).
6.
Remove strainer (17) (M1064A3) or strainer (18) (all other carriers) from hull weldnuts.
7.
Remove screw (19), two lockwashers (20), ground lead (12), and adapter (21) from pump (2). Discard lockwashers.
8.
On M1064A3 only, remove screw (22), locknut (23), and bracket (24) from pump (2). Discard locknut.
0635 00-2
