TM 9-2350-277-20-5
REPLACE PERSONNEL HEATER CONTROL BOX — Continued
0701 00
INSTALLATION
1.
Place control box case (6) on hull weldnuts (9). Secure with two new lockwashers (8) and screws (7).
2.
Install heater control box (4) in case (6). Secure with two screws (5).
3.
Connect heater wiring harness (3) to control box (4).
4.
Connect circuit 400 lead (1) to control box lead (2).
FOLLOW-THROUGH STEPS
1.
Connect battery ground strap (WP 0337 00), (WP 0338 00), or (WP 0339 00).
2.
Start heater (see your -10). Check that control box works right. Turn heater off.
END OF TASK
0701 00-3/4 blank
