TM 9-2350-277-20-5
REPAIR PERSONNEL HEATER CONTROL BOX Continued
0702 00
2.
Remove indicator light assembly (19) from control box (12).
a.
Remove nut (8), lockwasher (9), and ground lead (10) from circuit breaker (7) mounting screw (11). Discard
lockwasher.
b.
Remove screw (1), lockwasher (2), and lead 17-3 (5) from circuit breaker (7).
c.
Remove screw (13), lockwasher (14), and lead 19-2 (15) from RUN-OFF-START switch (16).
d.
Unscrew cap (17) and remove bulb (18) from light assembly (19).
e.
Remove nut (20), lockwasher (21), and light assembly (19) from control box (12).
3.
Remove RUN-OFF-START switch (11) from control box (13).
a.
Remove six screws (1), lockwashers (2), jumper 15-17 (3), jumper 13-20 (4), lead 20-C (5), lead 14-A (6), jumper
21-18 (7), jumper 21-14 (8), lead 19-2 (9), and lead 19-E (10) from RUN-OFF-START switch (11).
b.
Remove two screws (12) and RUN-OFF-START switch (11) from control box (13).
0702 00-2