REPLACE RAMP CONTROL VALVE HOSE AND ELBOW

REPLACE SAFETY RELIEF VALVE, TUBE, HOSE, AND FITTINGS

TM-9-2350-277-20-5 Carrier Personnel Full Tracked Armored M113A3 2350-01-219-7577 (EIC AE7) Carrier Command Post Light Tracked M577A3 2350-01-369-6085 (EIC AE7) Manual
Page Navigation
109

TM 9-2350-277-20-5 REPLACE RAMP CONTROL VALVE HOSE AND ELBOW 0663 00 THIS WORK PACKAGE COVERS: Removal (page 0663 00-1). Installation (page 0663 00-3). INITIAL SETUP: Maintenance Level Unit Tools and Special Tools General Mechanic’s Tool Kit (WP 0926 00, Item 65) Materials/Parts Sealing Compound (WP 0928 00, Item 56) Personnel Required Unit Mechanic References See your -10 Equipment Condition Engine stopped (see your -10) Carrier blocked (see your -10) Driver’s power plant access panel removed (see your -10) Hydraulic reservoir drained (WP 0671 00) REMOVAL WARNING Fire Resistant Hydraulic fluid (FRH) is toxic if absorbed through skin or ingested. Do not service hydraulic system when FRH is hot or pressurized. Wear gloves and avoid contact with skin. If FRH contacts skin, wash immediately with soap. If FRH gets into eyes, wash with lots of water for 15 minutes and get medical attention. If FRH is swallowed, get medical attention. NOTE There are two types of ramp control valves. One has an internal relief valve and the other has an external relief valve. Replacement of the ramp control valve hose is the same for both types. 1. Disconnect quick disconnect (1) at bottom of hose (2) from engine hose quick disconnect. 0663 00-1

Privacy Statement
Press Release
Contact