INSTALLATION (cont) - TM-9-2350-277-20-3

REPLACE BATTERY TO MASTER SWITCH LEAD (CIRCUIT 6) (M577A3 AND M1068A3 ONLY)

TM-9-2350-277-20-3 Carrier Personnel Full Tracked Armored M113A3 2350-01-219-7577 (EIC AE7) Carrier Command Post Light Tracked M577A3 2350-01-369-6085 (EIC AE7) Manual
Page Navigation
386

TM 9-2350-277-20-3 REPLACE BATTERY TO MASTER SWITCH LEAD (CIRCUIT 6) (M113A3, M901A3, AND M1059A3 ONLY) — Continued 0356 00 4. Route circuit 6 lead (1) through hull support channel (2). 5. Install two clamps (3) on circuit 6 lead (1). Secure with two screws (4) and new lockwashers (5). 6. Install new grommet (6) on circuit 6 lead (1). Route lead through side of front battery box (7). 7. Install circuit 6 lead (1) and positive jumper lead (8) on positive terminal (9) of front battery. Secure with screw (10) and nut (11). FOLLOW-THROUGH STEPS 1. Install battery access covers (see your -10). 2. Connect battery ground strap (WP 0337 00). 3. Close spall liners (see your -10). 4. Start engine (see your -10). 5. Raise and lock ramp (see your -10). 6. Stop engine (see your -10). END OF TASK 0356 00-5/6 blank

Privacy Statement
Press Release
Contact