TM 9-2350-277-20-3
REPLACE BATTERY TO MASTER SWITCH LEAD (CIRCUIT 6) (M577A3 AND M1068A3
ONLY) Continued
0357 00
4.
Tie cord hanging from hull transverse beam (1) to new or repaired circuit 6 lead (2) with strong knot. Pull cord from
opposite side of carrier, pulling circuit 6 lead (2) through hull transverse beam (1). Untie cord from circuit 6 lead (2).
5.
Install two clamps (3) on circuit 6 lead (2) and secure to hull weldnut with two screws (4) and new lockwashers (5).
6.
Install three clamps (6) on circuit 6 lead (2).
7.
Install five clamps (6) on weldnuts with three screws (7) and new lockwashers (8).
8.
Secure other harnesses to circuit 6 lead (2) with new straps (9).
0357 00-5