INSPECTION AND REPAIR - TM-9-2350-267-34

TM-9-2350-267-34 Hull Powerpack Drive Controls Tracks Suspension and Associated Components Carrier Ammunition Tracked Manual
Page Navigation
75

AIR CLEANER BLOWER (CONTINUED) I Remove screws (14), lockwasher (15), ground lead (16) and retaining strap (17) from impeller housing (13). Discard lockwasher. J Remove lead assembly with capacitor (18) from impeller housing (13) by removing four screws (19) and four lockwashers (20). Discard lockwashers. K Remove and discard roll pin (21). L Using screwdriver in slot (22) to hold motor shaft, remove self-locking nut (23), flat washer (24), threaded impeller (25), and flat washer (26) from motor assembly (11). Discard self-locking nut. INSPECTION AND REPAIR A Check impeller housing (13) for cracks or damage. Replace as necessary. B Check motor cover (3) for cracks, dents or other damage. Replace as necessary. 4-31 Change 4 TM 9-2350-267-34

Privacy Statement
Press Release
Contact