RETAINING STRAP AND CHANNEL GROUP REPAIR (CONTINUED)
DISASSEMBLY
A
B
C
D
E
Unscrew turnbuckle (15) to separate top retaining strap (16) from side
retaining strap (17).
Discard and replace defective straps (16 and 17) or turnbuckle (15).
Remove and discard pad (18) if required (p 4-22).
Separate channel (11), stud (12), nut (13), and spring pin (19).
Remove and discard pad (20) if required (p 4-22).
ASSEMBLY
A
B
C
D
Replace pads (18 and 20) if necessary (p 4-22).
Screw stud (12) into channel (11).
Install nut (13) and spring pin (19) on stud (12).
Join side retaining strap (17) and top retaining strap (16) using turnbuckle
(15).
4-24.1
Change 4
TM 9-2350-267-34