UNIVERSAL JOINTS REPAIR (CONTINUED)

CHAPTER 5 MAINTENANCE PROCEDURES COOLING SYSTEM

TM-9-2350-267-34 Hull Powerpack Drive Controls Tracks Suspension and Associated Components Carrier Ammunition Tracked Manual
Page Navigation
79

5-2 TM 9-2350-267-34 UNIVERSAL JOINTS REPAIR (CONTINUED) INSPECTION AND REPAIR A Check end hubs (7) for chipped, broken or missing splines (8). B Measure universal joint (6) under static no-load condition. Length should be 14-1/4 inches maximum. C Apply 20 ± 2 lb compression on universal joint (6). Length should be 13-3/16 inches maximum. D Repeat steps B and C for universal joint (5). Static no-load length should be 12 inches maximum. Compression length should be 10-11/16 inches minimum. INSTALLATION Reverse order of removal. TA309735

Privacy Statement
Press Release
Contact