CARRIER ASSEMBLY AND MOTOR SUPPORT BRACKET: REMOVAL, INSTALLATION AND ADJUSTMENT (CONTINUED)
ADJUSTMENT
A Loosen two nuts (30) and adjust two setscrews (31) in each of
two outer roller bearing retainers (32) to allow smooth, but firm
up/down travel of carrier assembly (22).
B
After adjustment, tighten two nuts (30) to secure each of two
bearing retainers on carrier (22).
C Secure four setscrews (31) with four jamnuts (33).
TA57275
12-35
Change 2
TM 9-2350-267-20
