WINCH ASSEMBLY
ASSEMBLY
A Install sleeve (22) on winch (14) crank and secure by tightening two
setscrews (21 and 23).
B Insert cable (1) in clevis (4) and secure by tightening locknut (20).
C Install quick-release pin (3) and chain (19) on cable (1) with two S-hooks
(18).
D Install two spacers (17) and sheave (10) on winch bracket (8) with shaft (16).
E
Install setscrew (15).
F
Install winch (14) on bracket (8) with two bolts (11), two new lockwashers
(12) and two flat washers (13).
G Install winch cable (1) around sheave (10) and winch drum.
INSTALLATION
A Install winch bracket (8) to stacker support (9) with four screws (5), four flat
washers (6) and four new lockwashers (7).
B
Connect cable (1) to carrier (2) by inserting quick-release pin (3) in winch
cable clevis (4).
C Raise carrier (2) from vehicle floor.
12-33
Change 4
TM 9-2350-267-20
