WINCH ASSEMBLY
xx
12-32.2
Change 4
TM 9-2350-267-20
A Remove winch cable (1) from around sheave (10) and winch drum.
B
Remove two bolts (11), two lockwashers (12), two flat washers (13) and
winch (14) from winch bracket (8). Discard lockwashers.
C Remove setscrew (15).
D Tap shaft (16) from bracket (8) and remove two spacers (17) and sheave (10).
E Open two S-hooks (18) and remove quick-release chain (19) from
cable (1).
I
CAUTION
I
Position clevis (4) in soft jawed vise so that it will not be
bent or closed when vice jaws are tightened.
F
Place clevis (4) in soft jawed vise and loosen locknut (20). Pull cable (1)
from clevis (4).
G Rotate winch (14) crank until setscrew (21) in sleeve (22) is accessible.
Loosen setscrew (21). Do not remove unless damaged.
H Rotate winch (14) crank until setscrew (23) in sleeve (22) is accessible.
Loosen setscrew (23). Do not remove unless damaged.
I
Remove sleeve (22) from winch (14) crank.
