TM 9-2350-261-34
27. Plug relay socket (1) in relay XK2 (2).
28. Install relay bail (3) over relay XK2 (2),
and relay socket (1) on left panel (4) and
secure with two screws (5), new
locknuts (6), and four washers (7).
29. Install new straps (8) on wires as required.
30. Close/install faceplate (9) on enclosure (10),
secure with ten screws (11) and new
lockwashers (12).
FOLLOW-THROUGH STEPS
1. Install power control enclosure assembly
(see your -20).
END OF TASK
Change 4
21.1-33
