NOTE
Tag all leads/wires before removal for
proper installation later.
See wiring diagram for disassemble/
assemble of wires/leads.
12. Remove straps (1) from wires as required.
Discard straps.
13. Remove sixteen screws (2), locknuts (3), four
connectors J24 (4), J31 (5), and J36 (6)
from left panel (7). Discard locknuts.
14. Remove sixteen screws (2), locknuts (3), and
four connectors J30 (8), J32 (9), J33 (10),
and J34 (11) from 1eft panel (7). Discard
locknuts.
15. Remove/de-solder twenty-eight wires (12)
from terminals of connectors. See wiring
diagram.
TM 9-2350-261-34
ASSEMBLE
16.
17.
18.
19.
Solder/install twenty-eight wires (12) on
terminals of connectors. See wiring diagram.
Install four connectors J30 (8), J32 (9), J33
(10), and J34 (11) on left panel (7), secure
with sixteen screws (2) and new locknuts
(3).
Install four connectors J24 (4), J31 (5), and
J36 (6) on left panel (7), secure with sixteen
screws (2) and new locknuts (3).
Install new straps (1) on wires as required.
GO TO NEXT PAGE
Change 4
21.1-31
