TM 9-2350-261-34
18.
19.
20.
21.
Install connector J29 (1), four screws (2),
and new locknut (3) on enclosure (4).
Install circuit lead 34A (5) on J29 (1).
Install connector J28 (6), four screws (7),
and new locknuts (8) on enclosure (4).
Install circuit lead 44A (9) on J28 (6).
Install connector J27 (10), four screws (11),
and new locknuts (12) on enclosure (4).
Install circuit leads 11A, 28A, 12A, 28B,
and 3W (13) on J27 (10).
Install connector J37 (14), four screws (15),
and new locknuts (16) on enclosure (4).
Install circuit leads 20B, 18D, and 3AC (17)
on J37 (14).
22.
23.
24.
25.
26.
21.1-26
Change 4
Install connector J25 (18), connector J26
(19), two dust caps (20) with retainers,
eight screws (21), and new locknuts (22)
enclosure (4).
on
Install circuit 32C lead (23), screw (24), and
lockwasher (25) on negative terminal of
connector J26 (19).
Install circuit 36C lead (26), screw (27), and
lockwasher (28) on positive terminal of
connector J26 (19).
Install circuit 32E lead (29), screws (30), and
lockwasher (31) on negative terminal of
connector J25 (18).
Install circuit 31A lead (32), screw (33), and
lockwasher (34) on positive terminal of
connector J25 (18).
