TM 9-2350-261-34
27. Close faceplate (1) and install 10 screws (2)
and new lockwashers (3).
28. Move power supplies (4) into the proper
position inside power enclosure (5). Have
helper assist.
29. Install eight screws (6), new lockwashers (7)
and secure power supplies (4) to bracket (8)
inside enclosure (5).
30. Install cover (9), 12 new lockwashers (10),
and screws (11) on power enclosure (5).
FOLLOW-THROUGH STEPS
1. Install power control enclosure assembly
(see your -20).
END OF TASK
Change 4
21.1-27
