TM 9-2350-261-34
A S S E M B LY
6. Install five leads (1), screw (2), new
lockwasher (3), nut (4), two washers (5),
and secure with wingnut (6) on
faceplate (7).
7. Install cable W13 (8) in EXTERNAL
POWER IN hole on faceplate (7) with cap
and chain (9) and secure with four
screws (10) and new locknuts (11).
8. Install cable W14 (12) in AC POWER OUT
hole on faceplate (7) with cap and chain
(13) and secure with four screws (14) and
new locknuts (15).
9. Install faceplate (7) on power entry box (16)
and secure with six screws (17) and
washers (18).
10. Close and secure lid (19) on power entry
box (16).
FOLLOW-THROUGH STEPS
1. Install power entry box (see your -20).
END OF TASK
Change 4
21.1-3
