TM 9-2350-261-34
I N S T A L L C A R G O H A T C H A R M O R S H I E L D S ( M 1 1 3 A 2 O N L Y )
INITIAL SETUP
Tools:
General Mechanics Tool Kit (Item 35, App B)
Portable Electric Drill (Item 23, App B)
Portable Electric Drill (Item 24, App B)
Screw Threading Set (Item 79, App B)
Twist Drill Set (Item 98, App B)
Twist Drill Set (Item 99, App B)
Measuring Tape (Item 92, App B)
Materials/Parts:
Machine Gun Shield Kit 11660854 ( 19207)
Personnel Required:
Track Vehicle Repairer 63H10
References:
See your -10
Equipment Conditions:
Engine stopped (see your -10)
Carrier blocked (see your -10)
INSTALL
3.
1.
2.
N O T E
If carrier is equipped with antenna
guards on the right side, the forward
guard may be a three or four screw type.
4.
Remove 9 or 10 screws (1) and flat
washers (2) that secure right front antenna
guard (3), right rear antenna guard (4), and
left rear antenna guard (5) on hull top deck.
Remove guards. Discard antenna guards and
screws. Keep washers.
Plug antenna guard mounting holes with two
flat washers under each screw.
Remove eight screws (6) that secure left and
right rear antenna access covers (7) on hull
top deck. Remove covers, adapters (8), and
gaskets (9). Discard two covers, two adapters,
and eight screws. Keep gaskets.
Place two gaskets (9) and two new covers (7)
on hull top deck. Secure with eight new
screws (6).
GO TO NEXT PAGE
20-5
