TM 9-2350-261-34
INSTALL
NOTE
To install nut (1) only, go directly to
step 8.
6.
7.
8.
9.
Position support assembly (2) on floor plate.
Weld support assembly (2) to floor plate in
accordance with TM 9-237. Use electrode type
5356.
Position nut (1) on support (2). Secure with
two rivets (3).
Install nut (4) and screw (5) into support
assembly (2).
F O L L O W - T H R O U G H S T E PS
1. Reconnect battery ground (see your -20).
2. Install lower accelerator pedal (see your -20).
3. Install upper accelerator pedal (see your -20).
4. Install driver's seat (see your -20).
5. Start engine (see your -10). Check that
accelerator pedal operates properly.
6. Raise and lock ramp (see your -10).
7. Stop/shutdown engine (see your -10).
END OF TASK
Change 4
8-39 (8-40 blank)(9-1 thru 9-8 deleted)
