TM 9-2350-261-34
93. Connect fuel supply hose (1) to tee (2) and
secondary fuel falter (3).
94. Connect fuel supply hose (4) to fuel pump
outlet elbow (5) and primary fuel falter (6).
95. Connect fuel supply hose (7) to fuel pump
inlet elbow (8) and secondary fuel falter (3).
96. Connect fuel supply hose (9) to primary fuel
filter (6).
97. Service both fuel falters (see your -20).
3-46
Change 1
98. Apply a thin, even coat of primer and then
sealing compound (item 71) to cleaned
external pipe threads of bushing (10). Do
not apply primer or sealant beyond small
end of threads.
99. Install engine low oil pressure switch
bushing (10) and switch (11) on engine
block.