TM 9-2350-261-3464.65.Secure engine breather tube (1)clamp (2) to engine rocker armclamp (3) with new lockwasherscrew (5) on engine.Connect two hoses (6 and 7) todrain tubes (8). Secure hose (6)(9) and screw (10) to engine.with springcover. Install(4) andair boxwith clamp66.67.68.69.70.71.72.Apply a thin, even coat of primer and thensealing compound (item 71) to cleaned exter-nal pipe threads of elbows (11), nipple (12),tee (13), elbow (14), and elbow (15). Do notapply primer or sealant beyond small end ofthreads.Install two elbows (11) in engine block.Connect two engine oiltwo elbows (11).Install oil cooler nipplecooler housing.filter hoses (16) to(12) in engine oilConnect tee (13) with elbow (14) to oilcooler housing nipple (12).Install transmission oil temperature sendingunit (17) to tee (13). Tighten oiltemperature sending(27-34 N.m) torque.wrench (item 110).Install elbow (15) inhousing.3-42Change 1unit to 240-300 in-lbUse torqueengine oil coder73.74.75.76.Connect two transmission oil hoses (18) totwo elbows (15 and 14).Apply a thin, even coat of primer and thensealing compound (item 71) to cleanedexternal pipe threads of elbows (19). Do notapply primer or sealant beyond small end ofthreads.Install two elbows (19) in engine coolerhousing.Connect two differential oil hoses(20 and 21) to two elbows (19). Secure(21) with clamp (22) and screw (23) tocooler housing.hoseoil
Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business