TM 9-2350-261-34
1 1 6,
117.
118.
Apply a thin coat of sealant (item 70) to
both sides of gasket (1) before assembly.
Install deaeration elbow (2) with hose (3),
clamp (4), elbow (5), and new gasket (1)
on thermostat housing cover (6). Secure
with two screws (7) and new key
washers (8).
Connect coolant tube (9) to deaeration
elbow (2). Secure with clamp (10).
FOLLOW-THROUGH STEPS
1.
2.
3.
4.
Install transfer gearcase on engine
5.
(page 3-18).
6.
Install transmission on transfer gearcase
(page 3-4).
7.
Install power plant in carrier (see your –20).
8.
Change engine oil and filter (see your LO).
Change fuel filters (see your -20).
Check belt tension (see your -20).
Adjust engine power disconnect
(see your -20).
Adjust governor linkage (see your -20).
END OF TASK
Change 1
3-51
