59. Apply a thin, even coat of primer and then
sealing compound (item 71) to cleaned
external pipe threads of bushing (1) and
elbow (2). Do not apply primer or sealant
beyond small end of threads.
60. Install thermostat housing bushing (1) in
thermostat housing (3).
61. Install thermostat housing elbow (2) in
bushing (1).
62. Connect hose (4) with clamp (5) to
thermostat elbow (2).
63.
TM9-2350-261-34
Install screen (6), air horn (7), bracket (8),
and hose (9) with clamp (10) on engine.
Secure with six screws (11) and twelve
washers (12). Tighten screws to 25-30 lb-ft
(34-41 N.m) torque. Use torque wrench
(item 105).
GO TO NEXT PAGE
Change 1
3-41
