TM9-2350-261-34
Connect hydraulic hose (1) to pump
42.
.
elbow (2).
43. Connect hydraulic hose (3) to pump
adapter (4).
44. Install clamp (5) and hydraulic hose (3) on
transfer gearcase. Secure with screw (6) and
new key washer (7). Tighten screw to 144
to 192 in-lb (16 to 22 N.m) torque. Use
torque wrench.
45. Fill hydraulic system (see your LO).
46. Fill transfer gearcase (see your LO).
FOLLOW-THROUGH STEPS
1. Install transmission on transfer gearcase
2. Install power plant in carrier (see your 10).
(page 3-4).
3-24
END OF TASK