TM 9-2350-261-34
3.
4.
5.
6.
7..
Remove screw ( 1), washer (2), key (3) and
8.
fan drive pulley (4) from secondary
intermediate gear (5).
Remove spring pin (6) and lever (7) from
actuator (8). Discard spring pin.
9.
Remove two screws (9), key washers ( 10),
flange (11 ) and packing ( 12) from secondary
pump drive gear (13). Discard key washers
and packing.
10.
Remove coupling (14) and retaining ring (15)
from ramp pump ( 16).
Remove four screws ( 17), ramp pump ( 16)
and gasket ( 18) from flange (11). Discard
gasket.
Remove cotter pin (19), nut (20) and washer
(21) that secure differential oil pump (22) to
secondary pump (drive Rear ( 23 ). Discard
cotter pin.
Remove two screws ( 24 ) key washers
(25) that secure differential pump ( 22) and
gasket (26) to transfer gearcase. Discard
gasket and key washers.
Remove differential oil pump (22), retaining
ring (27) and key (28) from drive gear (23).
3-26
