TM 9-2350-261-34
N O TE
22.
Carriers with a 200 amp generator have a
different generator drive pulley than car-
riers with a 100 amp generator. Check
that the new transfer gearcase has the
23.
proper generator drive pulley for your
carrier. If not. remove generator drive
pulley
assembly from unserviceable
transfer gearcase. Inspect drive assembly.
24.
If serviceable. install drive assembly in
new transfer gearcase. If unserviceable,
install new drive assembly in transfer
gearcase.
Install
improper
or
unserviceable
drive
assembly
in
unserviceable transfer gearcase.
See
TM9-2520-238-34
and
TM9-2520–238-34P.
Install fan drive pulley (1) on secondary in-
termediate gear ( 2). Secure with screw ( 3),
washer (4) and key (5).
Install two fan idler assemblies (6 and 7) on
transfer gearcase. Secure with two straight
pins (8) and two new cotter pins (9).
Apply a thin coat of antiseize compound to
cleaned threads of three screws ( 10).
Install idler arm bracket ( 11) and idler arm
assemblies (6 and 7) on transfer gearcase.
Secure with three screws (10), two new key
washers ( 12), one new lock washer ( 13), and
one flat washer ( 14).
FOLLOW-THROUGH STEPS
1. Install transfer gearcase on engine (page
2. Install transmission on transfer gearcase
3-18).
(3-4).
3. Install power plant in carrier (see your –20).
END OF TASK
3-28
25.
