TM9-2350-261-34
INSTALL
11.
12.
13.
14.
15.
Place new gasket (1) on differential oil
pump (2).
Install differential pump (2) with key (3)
and retaining ring (4) in secondary pump
drive gear (5).
Apply a thin coat of antiseize compound to
cleaned threads of two screws (6).
Install differential oil pump (2) on transfer
gearcase. Secure with two screws (6) and
new key washers (7). Tighten screws to
420-480 in-lb (47–54 N.m) torque. Use
torque wrench.
Install differential pump (2) on drive gear
( 5). secure with washer ( 8), nut (9) and
new cotter pin (10 ).
16.
17.
18.
19.
20.
21.
Install ramp pump ( 11) and new gasket
( 12) in flange ( 13). Secure with four screws
( 14), and retaining ring (15).
Install coupling (16) on secondary pump
drive gear (17).
Place new packing (18) on flange (13).
Install ramp pump (11 ) shaft in
coupling ( 16).
Install flange (13) on transfer gearcase.
Secure with two screws (19) and new key
washers (20). Tighten screws to 144-180
in-lb ( 16–20 N.m) torque. Use torque
wrench.
Secure lever (21) on actuator (22) with new
spring pin (23).
GO TO NEXT PAGE
3-27
